Tubular Matting for
anti-fatigue and insulation.

Supa tough,
Supa quality,
Supa comfort.
3-year warranty (under normal conditions).
Comes in a range of colours
SIZES:
12M x 0.70M
12M x 0.91M
12M x 1.20M

• Hollow tubes give an "air cushion" effect, resulting in a reduction in user fatigue.
• Tube Tread® insulates against cold, damp, noise and electricity.
• Easy to maintain - mostly, you can just hose it down and put it straight back!
• Tube Tread® is Supa-tough - the tubing is innovatively welded to cross-tubes, resulting in a space-age duckboard which has to be vandalized to tear it apart.
• It is Supa-resilient - fragile dropped items are less likely to break.
• It is Supa-safe - at a height of only 12 mm above the floor, it is not a trip hazard.

Uses.

Bars, hotels, cafeterias, banks, post offices, play-grounds, supermarket check-outs, laundries, clubs, caravan parks, resorts, swimming pools, laboratories, locker rooms, toll collection and parking lot booths, health centres, beach facilities, boats, workshops, garages, cars and 4WDs, walkways, showers, saunas, schools, shops, power stations, hospitals, barracks etc. Use an off-cut to sit on at your favourite sporting event!

Joiner Block.

To join matting, simply clip adjoining warps using this joiner block. Or, cut back the warps and join the wefts. Instant adhesive may also be used for more permanent joins.

Ramp end and ramp edge combine to form a safety mitred corner on the matting. Optional reflective tape is also available.

Technical Details

Product —The matting is tubular extruded flexible PVC heat welded into a duckboard configuration to achieve a long lasting anti-fatigue, slip resistant capability for commercial, domestic, hospitality and industrial uses.

Product Details — The tubular wefts are a nominal 7.5mm diameter at nominal 36mm centres and the warps a nominal 7.2m cross section with nominal 5mm spacings.

Colours — Wefts — Black (other colours subject to quotation & order quantity)

Colours — Warps — Black, Blue, Brown (Dark), Gold, Green (Olive), Grey, Orange, Red (other colours subject to quotation)

Roll Dimensions — 910mm x 12mts (10.92 sq/mt), 3’ x 39’3” (118.2 sq/ft), Mat edge height nominally 12.5mm (1/2”)

Material Weight — Nominally 3.67 kg per lineal metre, 2.2lbs per lineal foot

Shore Hardness — A63

Specific Gravity — 1.24

Tensile Strength — 139 kg/cm

100% Modulus Elongation — 53 kg/cm

Elongation — 410%

Tear Strength — 37 kg/cm

Temperature Effect— Flexible from minus 10C to 100C (14F to 212F)

Flammability — This material does not support combustion, being self extinguishing on removal of flame. Gases evolved on flame application are predominately HCI and CO

Cutting — Use shears or knife blade and straight edge

Joining — Side to Side — Use proprietary SVP ‘Side Saddles’

Joining — End to End — Cut back warps so as to butt over weft joining ‘Saddles’

Edging — Use SVP ‘Ramp Edging’ and solvent adhesive